D.W.A.R T-Coat
D.W.A.R is a single component, a solvent-based chemical with excellent gloss and colour retention. It is tintable in a wide range of colours. It has good water-resistant properties.
Introduction
Qualities
Application Area
Application Procedure
Packaging Available
Introduction
D.W.A.R is a single component, a solvent-based chemical with excellent gloss and colour retention. It is tintable in a wide range of colours. It has good water-resistant properties.
Qualities
- Dust, water, rust and acid-proof
- Single component coating
- Transparent and glossy
- Can be applied to any surface (cement, stone, wood, plastic, iron, etc)
- Can be applied by a brush/spray or cotton
- Washable
Application Area
Can be applied on any surface ( cement, stone, wood, plastic, iron etc.)
Application Procedure
Application Procedure:
- Apply 2-3 coats with spray, sponge or brush uniformly (wait for at least 30 minutes. after each coat.)
- Before application surface should be dry fully.
- Clean the surface thoroughly, as it should be free from dust, oil and etc.
- Remove existing paint layer or coating before applying our product.
- It is recommended to use a wire brush followed by sanding with emery
- Water wash the surface before application
Packaging Available
- 5 Ltr.
- 1 Ltr.
