Smart Master Coat Supreme
As stated in the product index, Smart Master Coat Supreme is a polymer-based chemical coating with dual features of Water & Heat Proofing which can be used in various areas from the foundation to the terrace of the building.
It can be universally applied on many surfaces like Cement, Wood, Metals, Plastics, etc. Advanced technology has been applied to make “smart” material so as to ensure that buildings are safe, energy-efficient & have enhanced life.
Introduction
Qualities
Application Area
Application Procedure
Packaging Available
Introduction
As stated in the product index, Smart Master Coat Supreme is a polymer-based chemical coating with dual features of Water & Heat Proofing which can be used in various areas from the foundation to the terrace of the building.
It can be universally applied on many surfaces like Cement, Wood, Metals, Plastics, etc. Advanced technology has been applied to make “smart” material so as to ensure that buildings are safe, energy-efficient & have enhanced life.
Qualities
- Flexible
- Provides extra coverage area
- Uses Fiber Reinforced Technology
- Makes the surface dust and dirt free
Application Area
- Terrace water & heat proofing.
- Foundation (to stop capillary upliftment & stop fungal, bacterial & chemical attacks).
- Roof/terrace garden.
- Bathrooms/kitchens.
- Water storage tank.
- A.C. ducts & Cooler ducts.
- Super exterior coat. (water, heat, fungus, bacteria, fading proof).
- Plastic tank heat proofing.
- Factory sheds (tin, asbestos, plastic).
- Wall dampness
Application Procedure
RECOMMENDED TYPE OF PRIMER
For proper surface bonding it is recommended to use CCP mix+ as a base coat in proper ratio ( Mix 1 kg Cement + 200 ml Water ) + ( 1 ltr CCP mix+) = 2 COATS for 35 Sqft.
PROCESS OF APPLYING ON DPC / WALL / TERRACE
For proper surface bonding it is recommended to use CCP mix+ as a base coat in proper ratio ( Mix 1 kg Cement + 200 ml Water ) + ( 1 ltr CCP mix+) = 2 COATS for 35 Sqft.
PROCESS OF APPLYING ON DPC / WALL / TERRACE
- Prepare & apply Smart Master Coat Supereme after primer by mixing 10% water.
- Wait for min 1- 2 hour @ 28°C – 30°C (Depending upon the climatic situation to get the Coat Cured fully).
- Apply second coat by mixing 10% water in Smart Master Coat Supereme.
- The original surface should not reflect or be visible after the second coat.
- Wait for 2 hours and apply the third coat of Smart Master Coat Supereme by mixing 10% water to ensure 100% water proong.
- Wait for 1 hour after the 3rd coat and than apply 2 coats of Nano Top Coat for high repellency & tile finish.
Packaging Available
- 1kg
- 2kg
- 5kg
- 10kg
- 20Kg
