Smart Master Coat
As stated in the product index, Smart Master Coat is a polymer-based chemical coating with dual features of Water and Heat proofing which can be used in various areas from foundation to terrace of the building.
Smart Master Coat is made with the advanced technology of Polymer Chemicals. Making it a “smart” material in both waterproofing and heat barrier coating areas. By applying Smart Master Coat your building will be safe, energy-efficient, and have enhanced life.
Introduction
Qualities
Application Area
Application Procedure
Packaging Available
Introduction
As stated in the product index, Smart Master Coat is a polymer-based chemical coating with dual features of Water and Heat proofing which can be used in various areas from foundation to terrace of the building.
Smart Master Coat is made with the advanced technology of Polymer Chemicals. Making it a “smart” material in both waterproofing and heat barrier coating areas. By applying Smart Master Coat your building will be safe, energy-efficient, and have enhanced life.
Qualities
- Provides 100% waterproofing
- Aids in 85% heat proofing
- Acts as anti-rust on fresh metal surfaces
- Antifungal
- Anti-bacterial
- Termite resistant
- Water-resistant
- Washable
- Acts as high adhesion
- Even safe for drinking water storage tank
Application Area
- Terrace water & heat proofing
- Foundation (to stop capillary upliftment & stop fungal, bacterial & chemical attacks)
- Roof/terrace garden.
- Bathroom/kitchens.
- A.C. ducts, cooler ducts
- Super exterior coat
- Plastic tank heat proofing (water, heat, fungus, bacteria, fading proof)
- Factory sheds (tin, asbestos, plastic)
- Wall dampness
Application Procedure
RECOMMENDED TYPE OF PRIMER
For proper surface bonding it is recommended to use CCP mix+ as a base coat in proper ratio ( Mix 1.5 kg Cement + 400 ml Water ) + ( 1 ltr CCP mix+) = 2 COATS for 35 Sqft. PROCESS OF APPLYING ON DPC / WALL / TERRACE
For proper surface bonding it is recommended to use CCP mix+ as a base coat in proper ratio ( Mix 1.5 kg Cement + 400 ml Water ) + ( 1 ltr CCP mix+) = 2 COATS for 35 Sqft. PROCESS OF APPLYING ON DPC / WALL / TERRACE
- Prepare & apply Smart Master Coat after primer by mixing 25% water.
- Wait for min 1- 2 hour @ 28°C – 30°C (Depending upon the climatic situation to get the Coat Cured fully).
- Apply second coat by mixing 10% water in Smart Master Coat.
- The original surface should not reflect or be visible after the second coat.
- Wait for 2 hours and apply the third coat of Smart Master Coat by mixing 10% water to ensure 100% water proofing.
- Wait for 1 hour after the 3rd coat and than apply 2 coats of Nano Top Coat for high repellency & tile finish.
Packaging Available
- 1 Kg
- 2.25 Kg
- 6 Kg
- 11.25 Kg
- 22.5 Kg
