Polyshine Stone Bond GQT
Polyshine Stone Bond GQT is special as it is a specially made user-friendly, two-component, tough bond Product for stone & tiles with strong adhesion.
Introduction
Qualities
Application Area
Application Procedure
Packaging Available
Introduction
Polyshine Stone Bond GQT is special as it is a specially made user-friendly, two-component, tough bond Product for stone & tiles with strong adhesion.
Qualities
Qualities of Polyshine Stone Bond GQT:
- High strength adhesive for granites, quartzite, tiles
- Also for marbles, limestone, sandstone
- Two-component adhesive.
- Can be coloured with pigment for coloured stones.
- Water and chemical resistant after cure.
- User friendly.
- Easy to apply.
- The surface should be free from oil, grease, dust (loose particles) and moisture.
- Always mix the stone bond and hardener in the proper ratio. As per the given instruction.
- Thorough mixing should be done.
- Use the mixture within 30 min to avoid wastage.
- Always mix in small quantities.
Application Area
Product for Stone & Tiles with Strong adhesion.
Application Procedure
- Clean the surface thoroughly.
- Take 100 gms. of Stone Bond in a bowl. add 10 grams/100 grams or 270-300 drops/100 grams of hardener (NH-C) then mix it thoroughly.
- Apply the mixture on the surface to be bonded with the help of an iron blade (Funner Patti).
- Apply some pressure to the bonded surface for strong adhesion and wipe the excess material.
- Let the Bond cure for 8-12 hrs.
- warning: Always wear gloves while application.
Packaging Available
- 1.05 Kg
